Oki MB460 smart PrintSuperVision Users Manual - Page 222
To Change Device Management to a Different Computer, see Checking the Server ID P. 223.
View all Oki MB460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
14. Other Functions To Change Device Management to a Different Computer To change the server that currently acquires the job log to a different computer, delete the device on the current server (P. 218), and then re-add it to the new server. (P. 119) However, if the current server cannot be used due to a malfunction etc., perform the following operations on the new server. Note The server ID of the current server needs to be checked before changing the server. For information on checking the server ID, see "Checking the Server ID" (P. 223). 1 Check that the power of the device is turned on. 2 Start the server software on the new server and then register the device. 3 Configure the server ID settings in [Function Details] > [Manage] > [Device Management Settings] > [Device Settings]. 6 Click [Apply]. When the "Enter an administrator password for the device" window is displayed, enter the administrator password for the device and click [OK]. Note • Depending on the device, this may not be displayed. • For details on the device's factory set administrator password, see the User's Manual of the device. 7 When the [Check Server ID] window is displayed, enter the server ID of the server that acquires the current job log, and click [OK]. 4 C lick in [Log/Access Control] to open the settings window. 8 C ontinue setup by following the instructions on the screen. 5 Check [Record Job Log to Device]. - 222 -