Oki MB460 Network Guide Europe - Page 7
Onfiguration, Utilities
View all Oki MB460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CONFIGURATION UTILITIES You can configure the network interface card (NIC) by using one of the following methods: UTILITY Quick Setup AdminManager Web Browser Telnet SNMP FEATURES SYSTEM REQUIREMENTS Configure the NIC by launching or installing the Quick Setup utility. This utility allows you to: Enable/disable the Printer settings Web Page. Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. Configure the NIC in detail Configure the NIC and printer by using a Web browser such as Microsoft Internet Explorer or Mozilla Firefox. Configure the NIC using Telnet The machine and network card can be controlled using thirdparty vendor developed SNMP application. Windows: Windows 2000 Server/Professional Windows XP Home/Professional Windows XP Professional x64 Edition Windows Server 2003 Windows Server 2003 x64 Edition Windows Server 2008 Windows Server 2008 x64 Edition Windows Vista 32-bit Windows Vista 64-bit Windows 7 Windows 7 x64 Edition Windows Server 2008 R2 Mac: Mac OS X 10.3.0 or greater You need to install Rosetta if using MAC OS X 10.6 Microsoft Internet Explorer or similar. Third-party vendor developed TELNET package. A TELNET Application is standard in Windows/UNIX and Linux Third-party vendor developed SNMP application. USING QUICK SETUP Quick Setup utility allows you to configure the network interface easily and simply without installing any software packages. You can configure the following: > Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Configuration requires a PC with a supported Windows operating system. Refer to the table above for system requirements. This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/SPX. This utility must be used on a PC that is located on the same segment as the printer. 1. Insert the DVD-ROM into the DVD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click \setup.exe (in the root directory) on the DVDROM. Network configuration > 7