Oki ES9465 ES9465/ES9475 Quick Start Guide - Page 10
Description of Each Component
![]() |
View all Oki ES9465 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Chapter 1 PREPARATIONS Description of Each Component This section describes the names and operations of the equipment, control panel and touch panel. Front / Right side 17 16 1 Back side 2 15 3 6 14 7 13 3 12 8 4 9 5 11 10 1. Reversing Automatic Document Feeder The stack of originals is scanned one sheet at a time. Both sides of the originals can be scanned. A maximum of 100 sheets (80 g/m2 or 20 lb. Bond) can be placed in one go. (The maximum number of sheets that can be set may vary depending on the media type of the originals.) 2. Operator's Manual Pocket (back side) Keep the manual in this pocket. 3. USB port Use this connector when printing files stored in a USB device or storing scanned data into the USB device. The Front USB Cable is required for using the USB port. 4. USB terminal (4-pin) Use this terminal when connecting this equipment to a PC with a commercially available USB cable. 5. Network interface connector Use this connector when connecting this equipment to a network. 6. Automatic duplexing unit This unit makes copies on both sides of the paper. Open it when paper misfeeds occur. 7. MPT Use this to perform printing on special media types such as OHP film, etc. & P.27 "Copying from MPT" in this manual 8. Paper holding lever Use this to place paper on the MPT. 9. Paper feed cover (of the equipment) Open this cover when releasing paper misfed in the tray feeding area. 10. Paper feed cover Open this cover when releasing paper misfed in the Paper Feed Pedestal or Large Capacity Feeder. 11. Paper size indicator The size of the paper set in the tray can be checked. 12. Paper Feed Pedestal and Additional Drawer Module or Large Capacity Feeder Use the Paper Feed Pedestal to add one tray. The Additional Drawer Module can be installed in this device. A maximum of 550 sheets (80 g/m2 or 20 lb. Bond) of plain paper can be placed in one go. A maximum of 2000 sheets (80 g/m2 or 20 lb. Bond) of plain paper can be placed in the Large Capacity Feeder. 13. Tray A maximum of 250 sheets of plain paper can be placed in one go. & P.15 "Placing paper" in this manual 14. Front cover Open this cover when you replace the toner cartridge and clean the charger.
![](/manual_guide/products/oki-data-es9465-es9465es9475-quick-start-guide-8b1e99a/10.png)