Oki 91909701 Guide: User's, ML420/421 (English) - Page 36
Canada French, Multilingual, Portugal, Norway, BRASCII
View all Oki 91909701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Bottom Margin, Default = Valid Change to Invalid if you want the printer to ignore the bottom margin setting. CAUTION!! Setting the Bottom Margin to Invalid can cause loss of data and damage the printhead by allowing printing without paper. Busy Line, Default = SSD- Appears only when the optional Serial Interface is installed. If Ready/Busy protocol (factory default) is selected, you can choose which line your system monitors for a busy signal: • SSD -9V, select SSD• SSD +9V, select SSD+ • DTR -9V, select DTR • RTS -9V, select RTS Busy Time, Default = 200 ms Appears only when the optional Serial Interface is installed. Sets the length of the busy signal when the Ready/Busy protocol (factory default) is engaged, Centering Position, Default = DEFAULT Used to limit printhead travel when printing narrow columns. • Select Mode 1 for the narrow carriage printer. • Select Mode 1 or Mode 2 for the wide carriage printer. Character Set, Default = IBM Set I Epson and IBM emulations only. Use this to switch character sets to IBM Set II Character Set, Default = Standard MICROLINE emulation only. Use this to switch the character set to Line Graphics. Code Page, Default = USA Choose the Code Page character set you wish to use: USA, Canada French, Multilingual, Portugal, Norway, BRASCII, Abicomp, Multilingual 858, or ISO 8859-15. CSF Bin Select, Default = Bin 1 Appears only when the optional Dual-Bin Cut Sheet Feeder is installed. Use this to switch to Bin 2 as the default. 36 Microline 420/421User's Guide