NordicTrack A2350 Pro Treadmill User Manual - Page 7

1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Cut the shipping tie securing the Upright Wire (87) to the Base (95). Locate a plastic tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach two Base Pads (90) and two Base Pad Spacers (94) to the Base (95) in the locations shown with two #8 x 1" Tek Screws (5). Then, attach the other two Base Pads (90) with two #8 x 1" Tek Screws (5). B Hole 87 94 55 90 5 90 5 94 2. Attach a Wheel (96) to the Base (95) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Do not overtighten the Nut; the Wheel must turn freely. Press a Base Cap (89) into the Base (95). 2 8 95 96 10 A 90 5 95 90 5 89 7