Nintendo RVLSWC User Manual - Page 18
Using Nintendo GameCube, Controllers
View all Nintendo RVLSWC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using Nintendo GameCube Controllers Using Nintendo GameCube™ Controllers Setup of Nintendo GameCube Controllers NOTE: When using GameCube Controllers with the Wii console, be sure and use the stand plate to help prevent the console from being tipped over by pulling on the controller cable. (See page 11, Vertical Placement.) Optionally, the console can be placed horizontally. When using GameCube Controllers in the horizontal position, the controller socket cover can be removed to allow the console to lay flat. Connecting GameCube Controllers NOTE: GameCube controllers only work when playing GameCube games on the Wii console. • Plug the controllers into the GameCube Controller sockets on the side of the console. • Review the instruction booklet for the game you are playing for the number and position of controllers required for that specific game. • The Wii Classic Controller does not work with GameCube games. Nintendo GameCube Controller Use the Wii stand plate when using GameCube Controllers to prevent the console from tipping over. 32 Removing the Controller Socket Cover If you are using the Wii console in a horizontal position, you must remove the controller socket cover when using GameCube Controllers to allow the console to lay completely flat. Press in and up Horizontal Position 1. Stand the Wii console upright as shown and squeeze gently until you feel a slight click. 2. Remove the cover by pulling straight up out of the console. 3. The cover can be replaced by reinserting the cover straight down into the console until it clicks into place. NOTE: The GameCube Memory Slot Cover can be removed with the same procedure, and should be removed if you are using GameCube Memory Cards when the Wii console is placed horizontally. 33 Using Nintendo GameCube Controllers