Nikon COOLPIX W300 Reference Manual - Page 169
Send while, Mark for upload
View all Nikon COOLPIX W300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Problem Cause/Solution A Cannot upload images to a smart device that is connected with the SnapBridge app.1 • You can upload automatically through the auto link feature only when connected through Bluetooth. To upload automatically, set the following. - Network menu M Send while shooting M 130 Still images in the camera: Yes - A tab of the SnapBridge app M Auto link M - Auto download: Enable - If Network menu M Bluetooth M Send while 131 off in the camera is set to Off, change the setting to On or turn on the camera. • When there is a large number of images to upload - during Bluetooth communication, communication may be disconnected while uploading. If you turn the camera off and then on again, it is reconnected to the smart device. Uploading resumes after the camera is reconnected in the following situations. - When Network menu M Send while shooting M Still images in the camera is set to Yes - When images are marked for upload in Playback menu M Mark for upload in the camera • You may not be able to upload images or uploading - may be canceled while the camera is being operated. Cannot download still images at the original size on the smart device that is connected with the SnapBridge app.1 For Send while shooting and Mark for upload in the camera, still images are uploaded at an image size of 2 megapixels. To upload at their original size, use Download pictures in the SnapBridge app. - Cannot perform remote photography from a smart device that is connected with the SnapBridge app.1 • You cannot perform remote photography when there is no free space in the internal memory or memory card. Delete unnecessary images or insert a memory card with sufficient free space. • You may not be able to perform remote photography while the camera is being operated. - Communication quality is poor or image upload speed is extremely slow when using a Wi-Fi On the camera, try changing the channel in Network menu M Wi-Fi M Network settings M Channel. 130 connection with the SnapBridge app. 155 If There Is a Problem Troubleshooting