Netgear XSM4324CS Hardware Installation Guide - Page 9
One out-of-band 1G Ethernet port., One RJ-45 RS232 console port.
View all Netgear XSM4324CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches - Full 10G models with combo ports: - Twenty or forty-four independent 10GBASE-T autosensing ports and four 10G RJ45/SFP+ combo ports - Twenty-two or forty-six independent 10G fiber ports and two 10G RJ45/SFP+ combo ports • Support from 128G to 960G switching fabric (all ports line-rate), depending on the model. • One out-of-band 1G Ethernet port. • One RJ-45 RS232 console port. • One mini USB console port. • One regular USB port for connection to a storage device. • One or two power supply unit (PSU) bays for small form-factor modular PSUs. For the dual PSU bay models, the second PSU can support 1+1 redundancy. • Support for stacking on any 10G port. • Half-width or full-width model. • Full compatibility with IEEE standards: - IEEE 802.3i (10BASE-T) - IEEE 802.3u (100BASE-TX) - IEEE 802.3ab (1000BASE-T) - IEEE 802.3an (10GBASE-T) - IEEE 802.3z (1000BASE-X) - IEEE 802.3 Clause 49 (10GBASE-LR and 10GBASE-SR) - IEEE802.3ae (10GBASE Ethernet) - IEEE802.3az (Energy Efficient Ethernet) - IEEE 802.3x (Full-duplex flow control) - IEEE 802.1af (PoE) - IEEE 802.1at (PoE+) • AutoSensing and autonegotiating capabilities for all ports. • Auto Uplink™ technology is supported on all ports. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 16K Media Access Control (MAC) addresses. Introduction 9 Hardware Installation Guide