Home » Netgear Manuals » Bridges & Routers » Netgear R6330 » Manual Viewer

Netgear R6330 User Manual - Page 87

Set up a static route, ADVANCED > Advanced Setup > Static Routes

Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

AC1600 Smart WiFi Router In this case you must define a static route, telling your router to access 134.177.0.0 through the ISDN router at 192.168.1.100. Here is an example: • The Destination IP Address and IP Subnet Mask fields specify that this static route applies to all 134.177.x.x addresses. • The Gateway IP Address field specifies that all traffic for these addresses will be forwarded to the ISDN router at 192.168.1.100. • A metric value of 1 works because the ISDN router is on the LAN. • The Private check box is selected only as a precautionary security measure in case RIP is activated. Set up a static route To set up a static route: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 5. Click the Add button. The page adjusts. 6. In the Route Name field, type a name for this static route (for identification purposes only). 7. To limit access to the LAN only, select the Private check box. If the Private check box is selected, the static route is not reported in RIP. 8. To prevent the route from becoming active, clear the Active check box. In some situations, you might want to set up a static route but keep it disabled until a later time. By default, the Active check box is selected and a route becomes active after you click the Apply button. Manage Network Settings 87 User Manual

Section	Page
Contents	3
1. Hardware Overview of the Router	9
Unpack your router	10
Top panel LEDs	11
Back panel ports,buttons, and connectors	12
Router Label	13
Position the Router	13
Cable Your Router	15
Wall-Mount Your Router	15
2. Connect to the Network and Access the Router	17
Connect to the network	18
Connect to the network using a wired connection	18
Find and connect to the WiFi network	18
WiFi connection using WPS	18
Types of logins	19
Use a web browser to access the router	19
Automatic Internet Setup	19
Log in to the router	21
Install and manage your router with the Nighthawk app	21
Change the language	22
3. Specify Your Internet Settings	23
Use the Internet Setup Wizard	24
Manually set up the Internet connection	24
Specify an Internet connection without a login	24
Specify an Internet connection that uses a login	26
Specify IPv6 Internet connections	27
Requirements for entering IPv6 addresses	28
Use auto config for an IPv6 Internet connection	28
Use auto detect for an IPv6 Internet connection	30
Set up an IPv6 6to4 tunnel Internet connection	31
Set up an IPv6 6rd Internet connection	32
Set up an IPv6 pass-through Internet connection	34
Set up an IPv6 fixed Internet connection	35
Set up an IPv6 DHCP Internet connection	36
Set up an IPv6 PPPoE Internet connection	38
Manage the MTU size	39
MTU concepts	39
Change the MTU size	41
4. Control Access to the Internet	42
Enable access control to allow or block access to the Internet	43
Manage network access control lists	44
Use keywords to block Internet sites	45
Block services from the Internet	47
Delete keywords from the blocked list	48
Prevent blocking on a trusted computer	48
Schedule when to block Internet sites and services	49
Set up security event email notifications	50
5. Optimize Performance	52
Optimize Internet Streaming With QoS	53
Turn On Internet Access QoS	53
Add a QoS Rule by Device	54
Add a QoS Rule by Service	55
Edit a QoS Rule	55
Delete a QoS Rule	56
Delete All QoS Rules	57
Enable or Disable the Automatic QoS Database Update	57
Improve Network Connections With Universal Plug-N-Play	58
Manage Wi-Fi Multimedia Quality of Service	59
6. Manage Network Settings	61
View or change the WAN settings	62
Set up a default DMZ server	63
Change the Router’s Device Name	64
Change the LAN TCP/IP settings	64
Specify the IP addresses that the router assigns	66
Disable the DHCP server feature in the router	67
Manage reserved LAN IP addresses	68
Reserve an IP address	68
Edit a reserved IP address	69
Delete a reserved IP address entry	69
Use the WPS Wizard for WiFi connections	70
Specify Basic WiFi Settings	71
Change the Router WiFi Mode	72
Change the WiFi password or the WiFi security	73
Set up a guest WiFi network	74
Control the WiFi radios	76
Use the WiFi On/Off button	77
Enable or disable the WiFi radios	77
Set up a WiFi schedule	77
Specify WPS settings	78
Set up the router as a WiFi access point	79
Set up the router in bridge mode	80
Return the router to router mode	82
Set up a bridge for a port group or VLAN tag group	82
Set up a bridge for a port group	83
Set up a bridge for a VLAN tag group	84
Set up an IPTV port	85
Manage custom static routes	86
Set up a static route	87
Edit a static route	88
Delete a static route	89
Enable or disable MU-MIMO	89
Enable or disable airtime fairness	90
Enable or disable implicit beamforming	91
7. Manage Your Router	92
Update the router firmware	93
Check for new firmware and update the router	93
Manually upload firmware to the router	94
Change the admin password	95
Enable admin password recovery	95
Recover the admin password	96
View information about the router and the Internet and WiFi settings	97
Display the statistics of the Internet port	98
Check the Internet connection status	99
View and manage logs of router activity	100
View devices currently on the network	101
Monitor Internet traffic	101
Manage the router configuration file	103
Back up the settings	103
Erase the settings	103
Restore the settings	104
Remote access	105
Set up remote management	105
Use remote access	106
Remotely access your router using the Nighthawk app	106
Disable LED blinking or turn off LEDs	107
Return the router to its factory default settings	107
Use the Reset button	108
Erase the settings	108
8. Share USB Storage Devices Attached to the Router	110
USB device requirements	111
Connect a USB storage device to the router	111
Access a storage device connected to the router from a Windows-based computer	112
Map a USB device to a Windows network drive	112
Access a storage device that is connected to the router from a Mac	113
Back up Windows-based computers with ReadySHARE Vault	114
Back up Mac computers with Time Machine	114
Set up a USB hard drive on a Mac	115
Prepare to back up a large amount of data	116
Use Time Machine to back up onto a USB hard disk	116
Enable FTP access within your network	118
View network folders on a storage device	118
Add a network folder on a USB storage device	119
Edit a network folder on a USB storage device	120
Safely remove a USB storage device	121
9. Use Dynamic DNS to Access USB Storage Devices Through the Internet	122
Set up and manage Dynamic DNS	123
Set up FTP access through the Internet	123
Your personal FTP server	124
Set up your personal FTP server	124
Set up a new Dynamic DNS account	125
Specify a DNS account that you already created	125
Change the Dynamic DNS settings	126
Access USB storage devices through the Internet	127
10. Use the Router as a Media Server	128
Specify ReadyDLNA Media Server Settings	129
Play Music From a Storage Device With iTunes Server	130
Set Up the Router’s iTunes Server With iTunes	130
Set Up the Router’s iTunes Server With the Remote App	131
Set Up the Router to Work With TiVo	132
11. Use VPN to Access Your Network	134
Set up a VPN connection	135
Specify VPN Service in the Router	135
Install OpenVPN Software	136
Install OpenVPN Software on Your Windows Computer	136
Install OpenVPN Software on Your Mac Computer	139
Install OpenVPN Software on an iOS Device	140
Install OpenVPN Software on an Android Device	140
Use a VPN Tunnel on Your Windows Computer	141
Use VPN to Access the Router’s USB Device and Media	143
Use VPN to Access Your Internet Service at Home	143
Set Up VPN Client Internet Access in the Router	144
Block VPN Client Internet Access in the Router	144
Use a VPN Tunnel to Access Your Internet Service at Home	145
12. Manage Port Forwarding and Port Triggering	147
Manage Port Forwarding to a Local Server	148
Set Up Port Forwarding to a Local Server	148
Add a Custom Port Forwarding Service	149
Edit a Port Forwarding Service	150
Delete a Port Forwarding Entry	151
Application Example: Make a Local Web Server Public	151
How the Router Implements the Port Forwarding Rule	152
Port Triggering	152
Add a Port Triggering Service	153
Enable Port Triggering	154
Application Example: Port Triggering for Internet Relay Chat	154
13. Troubleshooting	156
Quick tips	157
Sequence to restart your network	157
Check the power adapter and Ethernet cable connections	157
Check the WiFi settings	157
Check the network settings	157
Troubleshoot with the LEDs	158
Standard LED behavior when the router is powered on	158
Power LED is off or blinking	158
LEDs never turn off	158
Internet or Ethernet LAN port LEDs are off	159
WiFi LED is off	159
You cannot log in to the router	159
You cannot access the Internet	160
Troubleshoot Internet browsing	162
Changes are not saved	162
Troubleshoot WiFi connectivity	163
Troubleshoot your network using the ping utility	163
Test the LAN path to your router	163
Test the path from a Windows-based computer to a remote device	164
14. Supplemental Information	166
Factory Settings	167