Netgear M4250-9G1F-PoE User Manual - Page 97
Perform a cable test
View all Netgear M4250-9G1F-PoE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
AV Line of Fully Managed Switches M4250 Series Perform a cable test You can test and display information about the cables that are connected to switch ports. To perform a cable test: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin as the user name, in the Password field, enter your local device password, and click the AV UI Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The Overview page displays. 4. Select Diagnostics > Cable Test. The Cable Test page displays. 5. Select the ports for which you want to test the attached cables. 6. Click the Test Selected Ports button. A cable test is performed on the selected ports. The cable test might take up to 30 seconds to complete. If the port forms an active link with a device, the cable status is Normal. The following table describes the test results that might display in the Cable Test Results section. Diagnostics and Troubleshooting 97 Audio Video User Manual