Netgear GSM7324NA FSM7326P Command line reference manual - Page 336
Broadcast Packets Transmitted
View all Netgear GSM7324NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 336 highlights
Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver- Packets Transmitted Successfully Transmit Errors Transmit Discards Max Info - The maximum size of the Info (non-MAC) field that this port will receive or transmit. Total - The number of frames that have been transmitted by this port to its segment. Unicast Packets Transmitted - The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. Multicast Packets Transmitted - The total number of packets that higher-level protocols requested be transmitted to a Multicast address, including those that were discarded or not sent. Broadcast Packets Transmitted - The total number of packets that higher-level protocols requested be transmitted to the Broadcast address, including those that were discarded or not sent. Total Errors - The sum of Single, Multiple, and Excessive Collisions. Tx FCS Errors - The total number of packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with an integral number of octets Oversized - The total number of frames that exceeded the max permitted frame size. This counter has a max increment rate of 815 counts per sec. at 10 Mb/s. Underrun Errors - The total number of frames discarded because the transmit FIFO buffer became empty during frame transmission. Total Discards - The sum of single collision frames discarded, multiple collision frames discarded, and excessive frames discarded. Single Collision Frames - A count of the number of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. 17-10 v1.0, February 2007 System Maintenance Commands