Netgear AC1750-Smart User Manual - Page 128
Set Up a Static Route, admin, ADVANCED > Advanced Setup > Static Routes, Private, Apply, Active
View all Netgear AC1750-Smart manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
AC1750 Smart WiFi Router Model R6350 Set Up a Static Route You can add a static route to a destination IP address and specify the subnet mask, gateway IP address, and metric. To set up a static route: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 5. Click the Add button. The page adjusts. 6. To make the route private, select the Private check box. A private static route is not reported in RIP. 7. To prevent the route from becoming active after you click the Apply button, clear the Active check box. In some situations, you might want to set up a static route but keep it disabled until a later time. By default, the Active check box is selected and a route becomes active after you click the Apply button. 8. Enter the settings as described in the following table. Field Description Destination IP Enter the IP address for the final destination of the route. Address IP Subnet Mask Enter the IP subnet mask for the final destination of the route. If the destination is a single host, enter 255.255.255.255. Manage the WAN and LAN 128 Network Settings User Manual