Netgear 1200 Installation Guide - Page 10
Troubleshooting Tips
View all Netgear 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Troubleshooting Tips Power LED is off. Power LED is blinking amber. Pick A Plug LED is off. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: • The Ethernet cable is unplugged. • The device connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within two seconds after the Ethernet link is up. • If you already set network security, make sure that all Powerline devices are using the same encryption key. See the online user manual for details. • Press the Factory Reset button on each device for one second to return the Powerline adapter to its factory default settings. 10