NEC NP-PA1505UL-W User Manual - Page 73
Indicator Message Error message, POWER, STATUS, LIGHT, TEMP., Projector status, Procedure
View all NEC NP-PA1505UL-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Indicator Message (Error message) 3. Appendix POWER Blue (Light) Blue (Light) Red (Blink*5) Red (Blink*5) Blue (Light) Red (Light) STATUS LIGHT Orange (Light) Status varies Off Orange (Light) TEMP. Off Orange (Light) Projector status A button has been pressed while the [CONTROL PANEL LOCK] is activated. ID numbers for the projector and the remote control do not match. Temperature problem Temperature problem Off Off Off Red (Light) Status varies Red (Light) Orange (Blink*3) or (Blink*5) Lens mounting error Off Error requiring service support Status varies Red (Light) Status varies Status varies Error requiring service support Off Procedure The [CONTROL PANEL LOCK] is activated. The setting must be canceled to operate the projector. Check the [CONTROL ID] Ambient temteprature is high. The projector's protection functions will activate depending on the temperature of the operating environment. Lower the room temperature. Ambient temperature is out of the operation temperature. Check if any obstruction stays near the exhaust vent. Lens is not mounted properly. Mount it. Although the projector can still be used, we recommend that you contact your dealer or service personnel and request an inspection. Contact your dealer or service personnel. Make sure to check and inform indicator status for asking to repair. *3 Repetition to light on for 2.5 seconds / off for 0.5 seconds *5 Repetition to light on for 0.5 seconds / off for 0.5 seconds 42