NEC NP-PA1505UL-W RS232 codes- Projectors - Page 12
Error code list
View all NEC NP-PA1505UL-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2.4 Error code list The following table lists the combinations of error codes (ERR1 and ERR2) and describes the error indicated by each combination. ERR1 00h 00h 01h 01h 01h 02h 02h 02h 02h 02h 02h 02h 02h 02h 02h 02h 02h 02h 03h 03h 03h ERR2 00h 01h 00h 01h 02h 00h 02h 03h 04h 06h 07h 08h 09h 0Ah 0Ch 0Dh 0Eh 0Fh 00h 01h 02h Error description The command cannot be recognized. The command is not supported by the model in use. The specified value is invalid. The specified input terminal is invalid. The specified language is invalid. Memory allocation error Memory in use The specified value cannot be set. Forced onscreen mute on Viewer error No signal A test pattern or filer is displayed. No PC card is inserted. Memory operation error An entry list is displayed. The command cannot be accepted because the power is off. The command execution failed. There is no authority necessary for the operation. The specified gain number is incorrect. The specified gain is invalid. Adjustment failed. ©NEC Display Solutions, Ltd. 2014-2020 12