NEC NP-P452W Users Manual - Page 98
and PC Control Utility application with [STANDBY MODE] set to [NETWORK STANDBY], NETWORK STANDBY].
View all NEC NP-P452W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5. Installation and Connections TIP: • With the projector's Ethernet/HDBaseT port, remote control is not available when the projector is in the standby mode (serial communications is not available). (Remote control becomes available when the projector's power is on). The 2 (two) methods below can be used to turn on the projector's power when it is in standby mode. 1. The projector can be operated by connecting the computer and projector to the network (on the projector, using the LAN port and PC Control Utility application with [STANDBY MODE] set to [NETWORK STANDBY] (→ page 101). Computer (for projector control) Switching hub, etc. Computer (for output) Example of a transmitter DC IN HDBaseT Video device with HDMI output Ethernet/HDBaseT 2. The projector can be operated by RS232C serial communication (On this projector, use the PC CONTROL terminal and the application software, PC Control Utility, and select [PC CONTROL] for the [SERIAL PORT]) with [STANDBY MODE] set to [NETWORK STANDBY]. 87