NEC NP-P452H Users Manual - Page 58
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL], Selecting Overscan Percentage [OVERSCAN]
View all NEC NP-P452H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. 4. Using On-Screen Menu - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied. To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL DATA] and reset the adjustments. Selecting Overscan Percentage [OVERSCAN] This allows you to set the appropriate overscan for an incoming signal. AUTO Display an appropriately overscanned image (factory setting). OFF Does not overscan the image. ON Overscans the image. Projected image Overscaned by 10% NOTE: • The [OVERSCAN] item cannot be selected when VIDEO signals are used or when [NATIVE] is selected for [ASPECT RATIO]. 47