NEC NP-ME372W User Manual - English - Page 111
Wireless Lan, Disable, Intelligent Connection, Set The Security Type Disable Or Wpa2-psk.
View all NEC NP-ME372W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
7. Connecting to a Network ④ WIRELESS LAN Configure the wireless LAN settings. Item name PROFILE Description There are 4 wireless LAN profiles as shown below. • DISABLE (initial value) • INTELLIGENT CONNECTION • SIMPLE ACCESS POINT • INFRASTRUCTURE If you are not using a wireless LAN, set the profile to [DISABLE]. The settings of the other 3 profiles are different from each other. This will be explained later. DISABLE Disable the WIRELESS LAN of the projector. INTELLIGENT CONNECTION Compared to connecting with infrastructure or a simple access point, it is easier to connect to MultiPresenter that has been installed in a computer or tablet terminal. Item name PROFILE MODE CHANNEL SECURITY TYPE Description INTELLIGENT CONNECTION Select the wireless mode (IEEE802.11b/g/n or IEEE802.11a/n). • Initial value: IEEE802.11b/g/n Set the wireless channel. • Initial value: AUTO Set the SECURITY TYPE (DISABLE or WPA2-PSK). • Initial value: DISABLE NOTE: • When the PIN TYPE set in the MultiPresenter settings is ONE-TIME, the SECURITY TYPE cannot be specified as it will be applied automatically. SECURITY KEY Set the SECURITY KEY. • Initial value: Blank • Allowable characters: alphanumeric symbols (including space) • Number of characters: 8-63 characters When a SECURITY KEY is set, a number of asterisks "*" equivalent to the number of characters is displayed. NOTE: • When the PIN TYPE set in the MultiPresenter settings is ONE-TIME, the SECURITY KEY cannot be set as it will be set automatically. 100