NEC NP-ME361W Users Manual - Page 60
Select the VIEWER start screen., Select a source other than [USB-A] and press the ENTER
View all NEC NP-ME361W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Removing the USB memory from the projector 1. Select the VIEWER start screen. Press the EXIT button with no menu displayed. 4. Using the Viewer 2. Remove the USB memory from the projector. Make sure that the LED on the USB memory is not flashing before removing the USB memory. NOTE: If you remove the USB memory from the projector with a slide displayed, the projector may not operate correctly. If this happens, turn off the projector and unplug the power cord. Wait 3 minutes, then connect the power cord, and turn on the projector. Exiting the Viewer 1. Press the MENU button with the slide screen or the thumbnail screen displayed. The control bar or the pop-up menu will be displayed. USB 2. Press the MENU button again. The on-screen menu will be displayed. 3. Select a source other than [USB-A] and press the ENTER button. The Viewer will be exited. TIP: To exit the Viewer using the remote control, select a source other than [USB-A]. 49