Miele Diamond G 5975 SCSF Operating and Installation manual - Page 64

Poor cleaning results 64, glasses take on

Get Miele Diamond G 5975 SCSF PDF manuals and user guides View all Miele Diamond G 5975 SCSF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Frequently asked questions Poor cleaning results Problem Possible fault Solution The dishes are not The dishes were not clean. loaded correctly. See "Loading the dishwasher". The program was not powerful enough. Select a more intensive program (see "Program Guide"). Stubborn but normal soiling (e.g. coffee, tea). Use the function "Adjust Sensor Wash" (depending on model, see "Settings"). Not enough detergent was Use more detergent, or dispensed. change the detergent. The spray arms are blocked. Turn the spray arms and rearrange the dishes if necessary. The triple filter in the wash Clean the filter and insert it cabinet is clogged or not correctly. Clean the spray correctly inserted. arm jets, if required (see The spray arm jets might "Cleaning and care"). be clogged as a result. The non-return valve is stuck open and blocked. Wash water will run back into the wash cabinet. Clean the drain pump and the non-return valve (see "Cleaning and care"). Glasses and cutlery The rinse aid dosage is show streaks. The set too high. glasses take on a bluish shimmer; the deposits can be wiped off. Reduce the dosage (see "Settings - Rinse aid"). 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Poor cleaning results
Problem
Possible fault
Solution
The dishes are not
clean.
The dishes were not
loaded correctly.
See "Loading the
dishwasher".
The program was not
powerful enough.
Select a more intensive
program (see "Program
Guide").
Stubborn but normal
soiling (e.g. coffee, tea).
Use the function "Adjust
Sensor Wash" (depending on
model, see "Settings").
Not enough detergent was
dispensed.
Use more detergent, or
change the detergent.
The spray arms are
blocked.
Turn the spray arms and
rearrange the dishes if
necessary.
The triple filter in the wash
cabinet is clogged or not
correctly inserted.
The spray arm jets might
be clogged as a result.
Clean the filter and insert it
correctly. Clean the spray
arm jets, if required (see
"Cleaning and care").
The non-return valve is
stuck open and blocked.
Wash water will run back
into the wash cabinet.
Clean the drain pump and the
non-return valve (see
"Cleaning and care").
Glasses and cutlery
show streaks. The
glasses take on a
bluish shimmer; the
deposits can be
wiped off.
The rinse aid dosage is
set too high.
Reduce the dosage (see
"Settings - Rinse aid").
Frequently asked questions
64