Metabo WP 9-115 Quick Operating Instructions 2 - Page 21
Emission values, Wear ear protectors
View all Metabo WP 9-115 Quick manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Pm2 = power output = weight without mains cable Measured values determined in conformity with EN 60745. Machine in protection class II ~ AC Power * Machines with the designation WE... : Energy-rich, high-frequency interference can cause fluctuations in speed. The fluctuations disappear, however, as soon as the interference fades away. The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards). Emission values These values make it possible to assess the emissions from the power tool and to compare different power tools. Depending on the operating conditions, the condition of the power tool or the accessories, the actual load may be higher or lower. For assessment purposes, please allow for breaks and periods when the load is lower. Based on the adjusted estimates, arrange protective measures for the user e.g. organisational measures. Vibration total value (vector sum of three directions) determined in accordance with EN 60745: ah, SG = Vibration emission value (surface grinding) ah, DS = Vibration emission value (sanding with sanding plate) ah, P = Vibration emission value (polishing) KTyhp,SiGca/Dl SA/P-e=ffeUcnticveertpaeinrctyei(vveibdrastoiounn)d levels: LLKpWpAAA, KWA = = = Sound-pressure level Acoustic power level Uncertainty During operation the noise level can exceed 80 dB(A). Wear ear protectors! ENGLISH en 21