Metabo W 24-230 MVT non-locking Operating Instructions - Page 11

N Steel wire brushes (always use with the hand guard attached.) O Bench cut-off stand For complete range of accessories, see www.metabo.com or refer to the main catalogue. 11. Repairs Repairs to electrical tools must be carried out by qualified electricians ONLY! Any Metabo power tool in need of repair can be sent to one of the addresses listed in the spare parts list. Please enclose a description of the fault to the power tool. 12. Environmental Protection The sanding dust generated may contain hazardous materials: do not dispose of with the household waste, but at a special collection point for hazardous waste. Metabo packaging is 100% recycled. Scrap power tools and accessories contain large amounts of valuable resources and plastics that can be recycled. These instructions are printed on chlorine-free bleached paper. 13. Technical Specifications Explanation of details on page 3. Subject to changes serving technical progress. tDmmaxa,x1 = Maximum sanding disc diameter = max. permitted thickness of clamping shank on accessory when using clamping nut (11) tmax,3 = Roughing disc/Parting disc: max. permitted thickness of accessory M = Spindle thread l = Length of the grinding spindle n = No-load speed (maximum speed) HI12P0 V = Current at 120 V = Horse power m = Weight without mains cable Wear ear protectors! The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards). ENGLISH en 11