Metabo SSW 18 LTX 600 Operating Instructions 2 - Page 8

en ENGLISH B Battery packs with different capacity Only use battery packs with the appropriate voltage for your power tool. C Screwdriving bits D 1/2" tool For a complete range of accessories, see www.metabo.com or the catalogue. 8. Repairs Repairs to electrical tools must be carried out by qualified electricians ONLY! If you have Metabo electrical tools that require repairs, please contact your Metabo service centre. For addresses see www.metabo.com. You can download spare parts lists from www.metabo.com. 9. Environmental Protection Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories. Battery packs must not be disposed of with regular waste. Return faulty or used battery packs to your Metabo dealer! Do not allow battery packs to come into contact with water! 10. Technical specifications Explanatory notes on the specifications on page 3. Changes due to technological progress reserved. U sn0 H m Mmax. = Voltage of battery pack = No-load speed = Impact frequency = Machine tool attachment = Weight (with smallest battery pack) = max. tightening torque The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards). Emission values Using these values, you can estimate the emissions from this power tool and compare these with the values emitted by other power tools. The actual values may be higher or lower, depending on the particular application and the condition of the tool or power tool. In estimating the values, you should also include work breaks and periods of low use. Based on the estimated emission values, specify protective measures for the user - for example, any organisational steps that must be put in place. Vibration total value (vector sum of three directions) determined in accordance with EN 60745: ah = Vibration emission value(screwdriving with impact) Kh = Uncertainty (vibration) Wear ear protectors! 8