Maytag UXT5236BD Owners Manual - Page 10
Range Hood Use, Range Hood Care
View all Maytag UXT5236BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
RANGE HOOD USE The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen. Range Hood Controls A B CD Operating the light The light On/Off button controls both lights. Press once for On and again for Off. Operating the blower The blower buttons turn the blower On/Off and control the blower speed and sound level for quiet operation. The speed can be changed anytime during fan operation by pressing the desired blower speed button. Press the blower On/Off button a second time to turn the blower Off. A. Light On/Off button B. Blower On/Off and minimum speed button C. Blower medium speed button D. Blower maximum speed button RANGE HOOD CARE Cleaning IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filter before operating hood. Exterior Surfaces: IMPORTANT: Do not use soap-filled scouring pads, abrasive cleaners, cooktop polishing creme, steel wool, gritty washcloths or paper towels. To avoid damage to the stainless steel, do not use cleaners that contain chlorine. Metal or Charcoal Filter To Clean the Filter: 1. Using a #2 Phillips screwdriver, remove the screw from the filter retainer. 2. To remove, pull the filter latch toward the front of the range hood and pull down on the front edge of the filter. Cleaning Method: ■ Liquid detergent or all-purpose cleaner: Rinse with clean water and dry with a soft, lint-free cloth. A ■ Glass cleaner to remove fingerprints. ■ For stainless steel models, use Stainless Steel Cleaner and Polish Part Number 31462A (not included): See the "Assistance or Service" section to order. B ■ For stainless steel models, rub in the direction of the grain to avoid scratching or damaging the surface. C A. Screw B. Grease filter latch C. Grease filter 3. For vented installations: Wash metal filter as needed in a dishwasher or hot detergent solution. For non-vented (recirculating) installations: Replace the metal filter with a charcoal filter. The charcoal filter is not washable. It should last up to 6 months with normal use. For information on ordering, see the "Assistance or Service" section. Dispose of old charcoal filter. 10