Maytag MVWB800VB Use and Care Manual - Page 11

Benefits And Features - washer model

Get Maytag MVWB800VB - 28inch Washer With SuperSize Capacity Plus PDF manuals and user guides
UPC - 883049145914
View all Maytag MVWB800VB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

5. Next, place the level on the side of the washer in the crease between the top of the washer and the cabinet. 6. Check for leaks around faucets and inlet hoses. Level the side. 6. If the washer is not level, move the washer out slightly, tip back, prop up the front of the washer on a wood block. Adjust the feet up or down as necessary by twisting the feet. Repeat steps 1 through 5 until washer is level. 7. Use a 9⁄16" or 14 mm open-end wrench to turn the locknut counterclockwise on the foot tightly against the washer cabinet. IMPORTANT: If the locknut is not tight against the washer cabinet, the washer may vibrate. 7. Plug into a grounded 3 prong outlet. 8. Remove any protective film or tape remaining on the washer. 9. Read "Washer Use." 10. To test and to clean your washer, measure 1⁄2 of the detergent manufacturer's recommended amount of High Efficiency (HE) powdered or liquid detergent for a mediumsize load and pour it into the detergent dispenser. Close the lid. Press POWER/CANCEL. Select a normal cycle and press START/PAUSE. Allow it to complete one whole cycle. Complete Installation 1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See "Electrical Requirements." 2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 3. Check that you have all of your tools. 4. Keep the foam packing ring from the washer tub for future relocation of the washer. Dispose of/recycle all packaging materials. 5. Check that the water faucets are on. BENEFITS AND FEATURES Your washer has several benefits and features which are summarized here. Some items may not apply to your model. Benefits High-Efficiency Wash System Your new top loading, high-efficiency washer saves you time by allowing you to do fewer, larger loads. It also conserves resources and lowers your water and energy bills by using the following innovations. INTELLIFILL™ Water Level Control This washer senses the load size and composition through a series of fills and wash motion. It then adjusts the water level for the best cleaning and rinsing performance. It eliminates the guesswork. The water level is just right for every wash load size. NOTE: You may notice during a cycle that the wash load is not completely submerged in water. This is normal for your washer. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
11
5.
Next, place the level on the side of the washer in the crease between the top of the
washer and the cabinet.
Level the side.
6.
If the washer is not level, move the washer out slightly, tip back, prop up the front of the
washer on a wood block. Adjust the feet up or down as necessary by twisting the feet.
Repeat steps 1 through 5 until washer is level.
7.
Use a
9
⁄
16
" or 14 mm open-end wrench to turn the locknut counterclockwise on the foot
tightly against the washer cabinet.
IMPORTANT:
If the locknut is not tight against the washer cabinet, the washer may
vibrate.
Complete Installation
1.
Check the electrical requirements. Be sure that you have the correct electrical supply and
the recommended grounding method. See “Electrical Requirements.”
2.
Check that all parts are now installed. If there is an extra part, go back through the steps
to see which step was skipped.
3.
Check that you have all of your tools.
4.
Keep the foam packing ring from the washer tub for future relocation of the washer.
Dispose of/recycle all packaging materials.
5.
Check that the water faucets are on.
6.
Check for leaks around faucets and inlet hoses.
7.
Plug into a grounded 3 prong outlet.
8.
Remove any protective film or tape remaining on the washer.
9.
Read “Washer Use.”
10.
To test and to clean your washer, measure
1
⁄
2
of the detergent manufacturer’s
recommended amount of High Efficiency (HE) powdered or liquid detergent for a medium-
size load and pour it into the detergent dispenser. Close the lid. Press
POWER/CANCEL. Select a normal cycle and press START/PAUSE. Allow it to complete
one whole cycle.
BENEFITS AND FEATURES
Your washer has several benefits and features which are summarized here. Some items may
not apply to your model.
Benefits
High-Efficiency Wash System
Your new top loading, high-efficiency washer saves you time by allowing you to do fewer,
larger loads. It also conserves resources and lowers your water and energy bills by using the
following innovations.
INTELLIFILL™ Water Level Control
This washer senses the load size and composition through a series of fills and wash motion.
It then adjusts the water level for the best cleaning and rinsing performance. It eliminates the
guesswork. The water level is just right for every wash load size.
NOTE:
You may notice during a cycle that the wash load is not completely submerged in
water. This is normal for your washer.