Marantz SR8015 Owners Manual English - Page 244

Contents Connections Playback o Speakers for ZONE2 / Speakers for ZONE3 / Speakers for ZONE2/3 / Speakers for Bi-Amp / Speakers for 2ch / Speakers for Front B When "Assign Mode" is set to "9.1ch + ZONE2", "9.1ch + ZONE3", "9.1ch + ZONE2/3-MONO", "7.1ch + ZONE2/3", "9.1ch (Bi-Amp)" or "9.1ch + Front B" in the menu, select the speaker terminal from which to output the channels to which the internal amplifier is assigned. (v p. 242) HEIGHT 1: HEIGHT 2: HEIGHT3/FRONT WIDE (Default)： The assigned channels are output from the HEIGHT1 speaker terminals. The height, ceiling, and Dolby Atmos Enabled channels cannot be used. The assigned channels are output from the HEIGHT2 speaker terminals. Up to one set of height, ceiling, and Dolby Atmos Enabled channels can be used. The assigned channels are output from the HEIGHT3/FRONT WIDE speaker terminals. Two sets of height, ceiling and Dolby Enabled speakers can be used. Front wide speakers cannot be used. Settings Tips Appendix o Floor Select the floor speakers location. 5ch & SB & FW: 5ch & SB (Default): 5ch & FW: 5ch: This layout combines a surround back or front wide speaker with the basic 5channel layout. This layout combines a surround back speaker with the basic 5-channel layout. This layout combines a front wide speaker with the basic 5-channel layout. This is a basic 5-channel layout that uses front speakers, center speakers and surround speakers. Front panel Display Rear panel 244 Remote Index