Marantz SR7015 Sound Mode Table - Page 5

Before Servicing This Unit Electrical Mechanical ※ 1 This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby speaker. It can also be selected when the "Speaker Virtualizer" setting is turned "On". ※ 2 The default sound mode for the AirPlay playback is "Direct". ※ 3 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal. ※ 4 This item can be selected if the Auro-3D signal contains Dolby TrueHD. ※ 5 This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal. ※ 6 This item can be selected when surround back speakers are used. ※ 7 This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input. ※ 8 This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input. ※ 10 Selectable when "Surround Parameter" - "IMAX" is set to "Auto" in the menu. ※ 11 Selectable when "Surround Parameter" - "IMAX" is set to "On" in the menu and a 48 kHz sampling frequency DTS 5.1 channel signal is being input. ※ 12 Selectable when "Surround Parameter" - "IMAX" is set to "Off". (Selectable sound modes vary depending on the type of input signal). ※ 13 This item can be selected when the input signal is DTS-HD Master Audio. ※ 14 This item can be selected if the Auro-3D signal contains DTS-HD Master Audio. ※ 15 This item can be selected when the input signal is DTS-HD Hi Resolution. ※ 16 This item can be selected when the input signal is DTS 96/24. ※ 17 This item cannot be selected if the sampling frequency of the input signal is 32 kHz. ※ 18 This item can be selected if the Auro-3D signal contains Multi Channel PCM. ※ 19 This item can be selected when the input signals contain surround back signals. ※ 20 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal. 10 Repair Information Updating