Marantz SR6008 Owner's Manual in English - Page 171
Error messages, Examples, Error details, Measures
View all Marantz SR6008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Microphone or Speaker is None Error details • Setup and measurement microphone is not detected. • Not all speakers could be detected. Measures • Connect the included Setup and measurement microphone to the SETUP MIC jack of this unit. • Check the speaker connections. Ambient noise is too high or • There is too much noise in the room. level is too low • Speaker or subwoofer sound is too low. • Either turn off any device generating noise or move it away. • Perform again when the surroundings are quieter. • Check the speaker installation and the direction in which the speakers are facing. • Adjust the subwoofer's volume. Front R : None • The displayed speaker could not be • Check the connections of the displayed speaker. detected. Front R : Phase • The displayed speaker is connected with the polarity reversed. • Check the polarity of the displayed speaker. • For some speakers, this error message may be displayed even if the speaker is properly connected. If you are sure the connection is correct, use p to select "Skip Error", then press ENTER. Front panel Display Rear panel 171 Remote Index