Marantz SR5015 Owners Manual English - Page 235
No sound comes out
View all Marantz SR5015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. 0 Check the connections for all devices. (v p. 36) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 36) 0 Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 36) 0 Check that a proper input source is selected. (v p. 71) 0 Adjust the volume. (v p. 72) 0 Cancel the mute mode. (v p. 72) 0 Check the digital audio input connector setting. (v p. 180) 0 Check the digital audio output setting on the connected device. On some devices, the digital audio output is set to off by default. 0 When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the speaker terminal and PRE OUT connector. 0 Audio is output to your Bluetooth headphones, but not to speakers or pre-outs when "Output Mode" set to "Bluetooth Only". Change "Output Mode" to "Bluetooth + Speakers" to output audio from your Bluetooth headphones as well as your speakers or pre-outs. (v p. 217) No sound comes out when using the DVI-D connection. 0 When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a separate audio connection. Front panel Display Rear panel 235 Remote Index