Marantz SR5010 SR5010 Owner's Manual in English - Page 242

Contents Connections Playback Settings Tips Appendix o No video is shown on the TV Symptom No picture appears. 0 Check the connections for all devices. Cause / Solution 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Match the input settings to the input connector of the TV connected to this unit. 0 Check that the proper input source is selected. 0 Check the video input connector setting. 0 Check that the resolution of the player corresponds to that of the TV. 0 Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not compatible with HDCP, video will not be output correctly. 0 To enjoy content that is copyright protected by HDCP 2.2, use a playback device and TV compatible with HDCP 2.2 only. 0 The HDMI signal cannot be converted to an analog signal. Use analog connections. No video is shown on the TV with the DVI-D connection. 0 Use an "High Speed HDMI cable with Ethernet" or "High speed cable" that comes with the HDMI logo if you wish to playback 4K (60/50 Hz) video. 0 With the DVI-D connection, on some device combinations, devices may not function properly due to the copy guard copyright protection (HDCP). No video from an input source such as a game console is shown on the TV. 0 When special video signals are input from a game console, etc., the video conversion function may not function. Connect the input connector to the monitor output connector of the same type. While the menu is being displayed, no video is shown on the TV. 0 The video being played will not appear in the background of the menu when the menu is operated during playback of the following video signals. - Some images of 3D video contents - Computer resolution images (example: VGA) - Video with an aspect ratio other than 16:9 or 4:3 - 4K video Page 51 185 69 185 228 254 － 255 － 254 － － Front panel Display Rear panel 242 Remote Index