Marantz SC-11S1 SC-11S1 pcf file - Page 12

ENGLISH NAMES AND FUNCTIONS OF PARTS FRONT PANEL !!1 0 o i u yt INPUT SELECTOR DISPLAY TONE PHONES OUT PHONES OPERATE POWER ON/OFF ATT. PHONO MC PRE OUT VOLUME !2 !3 q we r q POWER ON/OFF Switch This switch turns power to the unit ON and OFF. When pressed, power is activated and the blue indicator in the display w lights up. Pressing the switch again turns the power OFF. w Display Indicate the selected input source, volume level, and setting status. e Infrared Receptor Window This receptor window receives control signals sent from the included remote controller. r VOLUME Knob This knob is for setting the volume. The volume level is displayed on the display w. When turned slowly, the volume can be fine-adjusted in 0.5dB steps, whereas when turned rapidly, the volume level changes greatly. t PRE OUT Button This buttons turns output from the PRE OUT jack and BALANCED PREOUT jack on the rear panel ON and OFF. When using just the headphones, switch this button OFF. y PHONO MC Button This button switches the Phono equalizer amplifier setting between MC and MM. Set the phono equalizer amplifier according to the type of cartridge you use. u ATT. Button This button attenuates the volume with one press of the button. For instructions on How to Set the Attenuation Level, see page. 21. i Illumination Lamp The illumination lamp casts a blue light over the switches and buttons. It can be turned ON and OFF with the DISPLAY button. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 24. o DISPLAY Button This button turns the display and side illumination ON and OFF. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 24. !0 TONE Button This button turns the bass and treble tone control ON and OFF. For instructions on How to Trim Bass and Treble, see page. 23. If pressed and held for 2 seconds or longer, this button switches the subsonic filter ON/OFF. For details on SUBSONIC FILTER, see page 21. !1 PHONES OUT Button This button switches the headphone jack output signal ON/OFF. Set this to OFF when not in use. !2 INPUT SELECTOR Knob This knob is for selecting the input source to use in playback and recording. The selected input source is displayed in the display w. !3 PHONES Jack This jack is for connecting headphones with a standard stereo plug. 6