Marantz PM-15S1 PM-15S1 User Manual - Page 14

ENGLISH NAMES AND FUNCTIONS OF PARTS REAR PANEL A PHONO GND Terminal Connect the grounding wire from an analog record player here. B PHONO Input Jacks These jacks are for connecting to an analog record player. Both MC and MM cartridges can be used, therefore set the PHONO MC button on the front panel according to the type of cartridge you are using. In the bi-amp mode, the R channel jack cannot be used. C CD Input Jacks These jacks are for connecting to the output jacks of a Super Audio CD player, CD player, etc. In the bi-amp mode, the R channel jack cannot be used. D LINE 1/2 Input Jacks These jacks are for connecting to the output jacks of a tuner, DVD player, etc. In the bi-amp mode, the R channel jack cannot be used. E RECORDER 1/2 IN Jacks These jacks are for connecting to the output jacks of a CD-R, MD deck, tape deck, etc. In the bi-amp mode, the R channel jack cannot be used. F RECORDER 1/2 OUT Jacks These jacks are for connecting to the recording input jacks of a CD-R, MD deck, tape deck, etc. Output signals can be turned ON/OFF from the REC OUT button on the front panel. G PRE OUT Jacks These jacks are for connecting to the input jacks of another main amplifier or active subwoofer. Output signals can be turned ON/OFF from the PRE OUT button on the front panel. In the bi-amp mode, the signals input to the L channel are output to both output jacks. H SPEAKER SYSTEMS Output Terminals These terminals are for connecting a speaker system. Speaker output can be turned ON/OFF from the SPEAKERS button on the front panel. In the bi-amp mode, the signals input to the L channel are output to both output terminals. I REMOTE CONTROL Jacks These jacks are for connecting components that are capable of remote control (D.BUS jacks) such as a Marantz Super Audio CD Player or DVD Player. This enables these other components to be operated with the remote controller included with the PM-15S1. See "REMOTE CONTROL JACKS" on pg. 20. 10