Marantz NR1607 Owner s Manuals In English - Page 184

Contents Connections Playback Hide Sources Remove from the display input sources that are not used. Show (Default): Use this source. Hide: Do not use this source. 0 The "Bluetooth" function can be disabled by setting Bluetooth to "Hide". Source Level This function corrects the playback level of the selected input source's audio input. Make this setting if there are differences in the input volume levels between the different sources. -12 dB - +12 dB (Default : 0 dB) 0 "Source Level" settings are stored for each input source. Settings Tips Appendix Input Select Set the audio input mode of each input source. The input modes available for selection may vary depending on the input source. 0 "Input Select" settings are stored for each input source. o Input Mode Set the audio input modes for the different input sources. It is normally recommended to set the audio input mode to "Auto". Auto (Default): HDMI: Digital: Analog: Automatically detect input signal and perform playback. Play only signals from HDMI input. Play only signals from digital audio input. Play only signals from analog audio input. 0 When digital signals are properly input, the ~ indicator lights on the display. If the ~ indicator does not light, check "Input Assign" and the connections. (v p. 181) 0 If "HDMI Control" is set to "On" and a TV compatible with the ARC is connected via the HDMI MONITOR connectors, the input mode whose input source is "TV Audio" is fixed to ARC. Front panel Display Rear panel 184 Remote Index