Marantz NA8005 Owner's Manual in English - Page 25

Required system

Page 25 highlights

Contents Connections Playback Settings Tips Appendix Required system o Broadband Internet connection o Modem Device that connects to your broadband internet provider, and is very often supplied with the service. A type that is integrated with a router is also often available. o Router When using this unit, we recommend you use a router equipped with the following functions: 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. o LAN cable (CAT-5 or greater recommended) 0 Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores. 0 The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise. 0 When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at "Network connection (when "DHCP" settings is "Off")" (v p. 86). 0 With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. 0 With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. When this unit is connected to a network that does not have the DHCP function, configure settings such as the IP address, etc. in "Network connection (when "DHCP" setting is "Off")" (v p. 86). 0 When setting manually, check the setting contents with the network administrator. NOTE 0 A contract with an ISP is required to connect to the Internet. 0 No additional contract is needed if you already have a broadband connection to the Internet. 0 The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details. 0 Marantz assumes no responsibility whatsoever for any communication errors or troubles resulting from customer's network environment or connected devices. 0 This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE. 0 Do not connect an NETWORK connector directly to the LAN port / Ethernet connector on your computer. 0 To listen to audio streaming, use a router that supports audio streaming. Front panel Rear panel Remote control 25 unit Index

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

Required system
o
Broadband Internet connection
o
Modem
Device that connects to your broadband internet provider, and is very
often supplied with the service. A type that is integrated with a router is
also often available.
o
Router
When using this unit, we recommend you use a router equipped with
the following functions:
0
Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0
Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub
with a speed of 100 Mbps or greater.
o
LAN cable (CAT-5 or greater recommended)
0
Use only a shielded STP or ScTP LAN cable which is easily
available at electronics stores.
0
The normal shielded-type LAN cable is recommended. If a flat-type
cable or unshielded-type cable is used, other devices could be
affected by noise.
0
When using this unit connected to a network with no DHCP function, make the
settings for the IP address, etc., at “Network connection (when “DHCP” settings is
“Off”)”
(
v
p.
86).
0
With this unit, it is possible to use the DHCP and Auto IP functions to make the
network settings automatically.
0
With this unit, it is possible to use the DHCP and Auto IP functions to make the
network settings automatically. When this unit is connected to a network that does
not have the DHCP function, configure settings such as the IP address, etc. in
“Network connection (when “DHCP” setting is “Off”)” (
v
p.
86).
0
When setting manually, check the setting contents with the network administrator.
NOTE
0
A contract with an ISP is required to connect to the Internet.
0
No additional contract is needed if you already have a broadband connection to
the Internet.
0
The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0
Marantz assumes no responsibility whatsoever for any communication errors or
troubles resulting from customer’s network environment or connected devices.
0
This unit is not compatible with PPPoE. A PPPoE-compatible router is required if
you have a contract for a type of line set by PPPoE.
0
Do not connect an NETWORK connector directly to the LAN port / Ethernet
connector on your computer.
0
To listen to audio streaming, use a router that supports audio streaming.
Contents
Connections
Playback
Settings
Tips
Appendix
25
Front panel
Rear panel
Remote control
unit
Index