Marantz CD5003 CD5003 User Manual - English - Page 33

NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATIONS ADVANCED CONNECTIONS ENGLISH TROUBLESHOOTING In a case of trouble, check the items below. Incorrect operations can sometimes be taken for trouble and malfunctions. If the trouble persists even after the following points have been checked, consult your dealer or nearest Marantz sales office or service center. Symptoms Causes Action The power cable is not plugged Plug the power cable into an AC outlet. in. (page 9) The power to this unit is not Turn on the power to the unit. turned on. (page 10) The disc is not placed correctly. Place the disc correctly. (page 10) A disc does not rotate. The disc is placed upside-down. (The label of the disc is facing down.) Place the disc correctly. (page 10) The disc is dirty. Clean the recorded side of the disc. (page 33) The disc is scratched. A disc with many scratches may not be playable. (page 33) The disc is warped. A warped disc may not be playable. (page 33) An amplifier or speakers are not Connect the cables correctly. (Refer to connected correctly. User Guide supplied with the amplifier.) The power to the amplifier is not turned on. Turn on the power to the amplifier. (Refer to User Guide supplied with the amplifier.) The disc rotates, but there Set the function or the selector switch of is no sound output. The function or the selector the amplifier to "CD" or "AUX" (as per your switch of the amplifier is not set to connection setup). "CD" or "AUX" (according to your (Refer to User Guide supplied with the current connection setup). amplifier.) Symptoms Causes Action The distance between the unit and a remote controller is too great. Use the remote controller nearer the unit, within the operational range. (page 4) Some object is placed between the unit and remote controller. Remove the object. (page 4) The remote controller The batteries in the remote Replace all the batteries with new ones. cannot be operated. controller are exhausted. (page 4) The remote sensor of the unit is Avoid exposing the remote sensor to the exposed to strong light. strong light. (page 4) The REMOTE CONTROL switch on the rear panel is set to EXTERNAL. When the unit is to be used alone, set the switch to INTERNAL. (page 13) The disc is placed upside-down. Place the disc correctly. (page 10) A C D - R / C D - RW d i s c The recorded information is not cannot be played. in a music (CD-DA) format. Or Record correct data appropriate for the MP3/WMA files are not recorded unit. (page 32) correctly. Pitch control operation cannot be performed. The unit is not set to Audio EX OFF. Set the unit to Audio EX OFF. (page 24) Digital output is set to OFF. Set digital output to ON. (page 24) Digital signals are not Audio EX is set to Audio EX2. Set Audio EX to Audio EX1. (page 24) output. Audio EX is set to Audio EX OFF, Set the pitch control setting to O. (page 21) and the pitch control is used. Or set Audio EX to Audio EX1. (page 24) The disc stops rotating. The volume of the amplifier is set Adjust the volume of the amplifier. (Refer to to minimum. User Guide supplied with the amplifier.) The disc is dirty. Clean the recorded side of the disc. (page 33) The disc is scratched. A disc with many scratches may not be playable. (page 33) The disc is warped. A warped disc may not be playable. (page 33) The disc to be played is not a music CD. Or MP3/WMA files are not recorded on the disc. A CD-ROM for a played. (page 32) computer cannot be ADVANCED OPERATIONS TROUBLESHOOTING OTHERS 30