Marantz AV7706 User Guide English - Page 284

Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. 0 Check the connections for all devices. (v p. 44) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check the speaker connections and configurations. (v p. 49) 0 Check the connections for PRE OUT connectors. (v p. 44) 0 Check whether the audio device power is turned on. (v p. 71) 0 Check that a proper input source is selected. (v p. 91) 0 Adjust the volume. (v p. 92) 0 Cancel the mute mode. (v p. 92) 0 Check the digital audio input connector setting. (v p. 210) 0 Check the digital audio output setting on the connected device. On some devices, the digital audio output is set to off by default. 0 When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the speaker terminal and PRE OUT connector. 0 Audio is output to your Bluetooth headphones, but not to speakers or pre-outs when "Output Mode" set to "Bluetooth Only". Change "Output Mode" to "Bluetooth + Speakers" to output audio from your Bluetooth headphones as well as your speakers or pre-outs. (v p. 254) No sound comes out when using the DVI-D connection. 0 When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a separate audio connection. No sound comes out of a TV that is connected via HDMI. 0 Audio signals input to 7.1CH IN connectors on this unit cannot be output to the TV. Front panel Display Rear panel 284 Remote Index