Magnavox MC348 Owners Manual - Page 5

Setting with the brand name code, Auto Setting - codes

Get Magnavox MC348 PDF manuals and user guides View all Magnavox MC348 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Setting with the brand name code: 1. Find the single digit brand code of your device on the attached Brand Name Code List. 2. Power on your desired device (EX: TV) as usual. Aim the Universal Remote to the remote sensor for you device. 3. Press and hold the corresponding device's button and the numeric button of the brand code of your device at the same time. (For example: Press and holding the "TV" and "1" Buttons at the same time.) 4. Wait approximately 2 seconds, the LED Indicator will start blinking. 5. Release the numeric button and keep holding the device button. A different infrared signal of "Power off" is sent every 0.5 second. 6. Once your device is shut off, release the device button immediately to save the setting and exit. 7. Aim the Universal Remote to the remote sensor for your device then operation the device with the Universal Remote. If the device is responds correctly, it means you have right settings. Otherwise, set again starting from step 3 or try the following setting methods. Auto Setting: 1. Power on your desired device (EX: TV) as usual. 2. Press and release the corresponding device's selection button of your device (EX: TV Button). 3. Press and holding the SET Button approximately 3 seconds until the LED Indicator is illuminated then release the button. 4. Aim the Universal Remote to the remote sensor for your device then press and release the POWER Button. A different infrared signal of "Power off" is sent every 0.5 second. 5. Once your device is shut off, press the OK Button immediately to save the setting and exit. 6. Aim the Universal Remote to the remote sensor for your device then operate the device with the Universal Remote. If the device is responds correctly, it means you have right settings. Otherwise, set again starting from step 2 or try the following setting methods. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
Setting with the brand name code:
1.
Find the single digit brand code of your device on the attached Brand Name Code
List.
2.
Power on your desired device (EX: TV) as usual. Aim the Universal Remote to the
remote sensor for you device.
3.
Press and hold the corresponding device’s button and the numeric button of the
brand code of your device at the same time. (For example: Press and holding the
“TV” and “1” Buttons at the same time.)
4.
Wait approximately 2 seconds, the LED Indicator will start blinking.
5.
Release the numeric button and keep holding the device button. A different infrared
signal of “Power off” is sent every 0.5 second.
6.
Once your device is shut off, release the device button immediately to save the
setting and exit.
7.
Aim the Universal Remote to the remote sensor for your device then operation the
device with the Universal Remote. If the device is responds correctly, it means you
have right settings. Otherwise, set again starting from step 3 or try the following
setting methods.
Auto Setting:
1.
Power on your desired device (EX: TV) as usual.
2.
Press and release the corresponding device’s selection button of your device (EX: TV
Button).
3.
Press and holding the SET Button approximately 3 seconds until the LED Indicator is
illuminated then release the button.
4.
Aim the Universal Remote to the remote sensor for your device then press and
release the POWER Button. A different infrared signal of “Power off” is sent every 0.5
second.
5.
Once your device is shut off, press the OK Button immediately to save the setting and
exit.
6.
Aim the Universal Remote to the remote sensor for your device then operate the
device with the Universal Remote. If the device is responds correctly, it means you
have right settings. Otherwise, set again starting from step 2 or try the following
setting methods.
4