Magic Chef MCWC50DST User Manual - Page 8
Operating Your Appliance - e 3 display
View all Magic Chef MCWC50DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
OPERATING YOUR APPLIANCE MCWC50DST: Wine Cooler • The temperature range of the wine cooler is for 39°F ~ 64°F (4°C ~ 18°C) +/- 5°F. • Temperature Recommendations: Red Wine: 54°F ~ 61°F (12°C ~ 16°C) White Wine: 43°F ~ 50°F (6°C ~ 10°C) • The display indicates the average temperature of the appliance at the moment. Pre-Set Wine Zones • Press the "RED" or "WHITE" pads to choose preset storage conditions for either red or white wine. (The indicator light "RED" or "WHITE" will illuminate accordingly.) • The programmed temperature for red or white wine will be displayed for a few seconds. Manual Temperature Setting • The temperature of the wine cooler can be set anywhere between 39°F ~ 64°F (4°C ~ 18°C) by pressing temperature up ▲ and temperature down ▼pads as follows: 1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds). 2) Press the ▲▼ pads to increase or decrease the desired temperature in increments of one degree. 3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed within 10 seconds, your select temperature setting will be automatically confirmed. NOTE: • To select temperature display between Celsius (°C) or Fahrenheit (°F), press the "▲" pad for approximately 2 seconds. MCBC58DST: Beverage Cooler • The temperature range of the beverage cooler is for 39°F ~ 54°F (4°C ~ 12°C). +/- 5°F. • The display indicates the average temperature of the appliance at the moment. NORMAL Temperature Setting • When the appliance is switched on, or the "NORMAL" pad is pressed, the appliance runs on the temperature setting of 45°F (7°C) and the "NORMAL" indicator light will be illuminated. Manual Temperature Setting • The temperature of the beverage cooler can be set anywhere between 39°F ~ 54°F (4°C ~ 12°C) by pressing temperature up ▲ and temperature down ▼pads as follows: 1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds). 2) Press the ▲▼ pads to increase or decrease the desired temperature in increments of one degree. 3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed within 10 seconds, your select temperature setting will be automatically confirmed. NOTE: • The "MANUAL" indicator light will be illuminated while you are manually setting the temperature on the beverage cooler. • To select temperature display between Celsius (°C) or Fahrenheit (°F), press the "▲" pad for approximately 2 seconds. The following is applicable to both MCWC50DST and MCBC58DST: • The indicator will remain ON during refrigeration cycle and will be OFF during idle cycle. • To switch the Interior light ON/OFF, press the pad. 7 EN