Linksys WAP54GPE Cisco Small Business WRV210 Quick Start Guide - Page 13
Suggested Next Steps - manual
UPC - 745883560387
View all Linksys WAP54GPE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
• Passphrase: If you want to generate a key instead of entering a key manually, type a passphrase in the field. You can enter up to 32 alphanumeric characters. Then click Generate. A valid key appears in each of the Key 1 - Key 4 fields. • Key 1 - Key 4: If you did not use the Generate feature, enter a valid WEP key. Do not leave a field blank, and do not enter all zeroes; they are not valid key values. - If you chose 64-bit WEP encryption, the key must be exactly 10 hexadecimal characters in length. - If you chose 128-bit WEP encryption, the key must be exactly 26 hexadecimal characters in length. Valid hexadecimal characters are "0" to "9" and "A" to "F". STEP 6 Keep the default values for all other settings. STEP 7 Click Save to save the changes. STEP 8 To test the wireless setup, use the wireless client on any computer to enter the correct SSID and shared key for your wireless network. Verify that you can connect by entering a website address, such as www.cisco.com. Congratulations! The installation of the Wireless-G VPN router with RangeBooster is complete. For more advanced settings and security options, refer to the Administration Guide (see Where to Go From Here, page 13). 7 Suggested Next Steps The WRV210 is ready for use. It is not necessary to change any settings. However, the following steps are recommended: • To protect your network, Cisco recommends that you reset the administrative password. Click Administration > Management in the navigation tree. In the Admin Password field, enter the new password. Enter it again in the Re-enter to confirm field. Click Save to save your settings. 12 Cisco Small Business WRV210 Quick Start Guide