LiftMaster 8550WLB 8550W 8550WL 8550WLB 8550WLB-267 8557W 8587W WLED WLED-267 - Page 7

Programming Remote Control Below are the steps to program a new or existing remote control. Test remote control before reprogramming. 1. Press and release the LEARN Button on the garage door opener. 2. Press and hold the button on the remote control that you wish to use. Release the button when the garage door opener lights blink or two clicks are heard. OR Select Menu > Program > Remote and follow the on screen prompts. If your vehicle is equipped with a Homelink®, you may require an external adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for additional information. Wireless Keyless Entry Refer to the instructions provided with your keyless entry OR go to LiftMaster.com to download instructions. To Erase the Memory Erase ALL Remote Controls and Keyless Entries Press and hold the LEARN button LEARN Button until the LED goes out (approximately 6 seconds). All remote controls and keyless entries are now erased. Erase ALL Devices (Including myQ® enabled accessories) 1. Press and hold the LEARN button until the LED goes out (approximately 6 seconds). 2. Immediately press and hold the LEARN button until the LED goes out. All codes are now erased. Erase the Wi-Fi Network from the Garage Door Opener Press and hold the adjustment button until 3 beeps are heard (approximately 6 seconds). Adjustment Button 7