LiftMaster 8550W 8550W Users Guide Manual - Page 7
Programming, Remote Control, Wireless Keyless Entry, To Erase the Memory - homelink
View all LiftMaster 8550W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Programming Remote Control Below are the steps to program a new or existing remote control. Test remote control before reprogramming. 1. Press and release the LEARN Button on the garage door opener. 2. Press the button on the remote control. OR Select Menu > Program > Remote and follow the on screen prompts. If your vehicle is equipped with a Homelink®, you may require an external adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for additional information. To Erase the Memory Erase ALL Remote Controls and Keyless Entries Press and hold the LEARN button until the LED goes out (approximately 6 seconds). All remote controls and keyless entries are now erased. LEARN Button Erase ALL Devices (Including MyQ® enabled accessories) 1. Press and hold the LEARN button until the LED goes out (approximately 6 seconds). 2. Immediately press and hold the LEARN button until the LED goes out. All codes are now erased. Erase the Wi-Fi Network from the Garage Door Opener Press and hold the black adjustment button until 3 beeps are heard (approximately 6 seconds). Erase a MyQ® Account Black Adjustment Button Go to myLiftMaster.com to delete your MyQ account. Wireless Keyless Entry Refer to the instructions which were provided with your keyless entry product. 7