Lexmark MX310dn Card Stock & Label Guide - Page 150
Lexmark X950
View all Lexmark MX310dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Printer specifications 150 Card stock and label guidelines When printing on labels: • Set the paper type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die-cut, the edge of the label or the perforations, or between the die- cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing and result in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Use grain long card stock, and set the paper type to Card Stock. • Do not use creased card stock. It may cause paper jams. Lexmark X950 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X950 supports card stock up to 300 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Labels Card stock Trays 1-4 60-256 g/m2 60-256 g/m2 Multipurpose feeder 60-300 g/m2 60-300 g/m2 High‑capacity feeder 60-216 g/m2 60-216 g/m2