Lexmark 12N1515 User's Reference - Page 112
Serial Menu, Parallel Menu, USB Menu, Standard USB Port
UPC - 734646123327
View all Lexmark 12N1515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Understanding printer messages Message What this message means What you can do 54 Network Software Error 54 Std Network Software Error The printer cannot establish communications with an installed network port. • Press Go to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface by way of the parallel port. • Press Menu to open the Job Menu and reset the printer. 54 Std Par ENA Connection Lost 54 Par ENA Connection Lost The printer has lost the connection to an external print server (also called an external network adapter or ENA). • Make sure the cable connecting the ENA and the printer is securely attached. Turn the printer off and then on to reset the printer. • Press Go to clear the message. The printer erases any reference to the ENA and then resets. 56 Serial Port Disabled 56 Standard Serial Disabled Data has been sent to the printer through a serial port, but the serial port is disabled. • Press Go to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled. 56 Parallel Port Disabled 56 Std Parallel Port Disabled Data has been sent to the printer through a parallel port, but the parallel port is disabled. • Press Go to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled. 56 USB Port Disabled Data has been sent to the printer through a USB port, but the USB 56 Standard USB Port port is disabled. Disabled • Press Go to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item in the USB Menu is not set to Disabled. 57 Configuration Change The printer cannot restore jobs Press Go to clear the message. from the disk because the printer Some of the Print and Hold jobs trays or drawers have been stored on the disk will not be changed. restored. 58 Input Config Error Too many drawers with matching trays are installed on the printer. Turn off and unplug the printer. Remove the additional drawers or reconfigure the offending option. Plug in the printer and turn it on. Note: To prevent an electrical overload, plug your printer into a well-grounded outlet on a nonground fault interrupter (GFI) circuit. See also: Setup Guide Understanding printer messages 107