LevelOne FCS-5058 User Manual - Page 51
Config, Configuring Wireless Dial Settings
![]() |
View all LevelOne FCS-5058 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
User Manual of Network Camera higher the priority is. Note: DSCP refers to the Differentiated Service Code Point; and the DSCP value is used in the IP header to indicate the priority of the data. 3. Click Save to save the settings. Note: A reboot is required for the settings to take effect. 6.3.8 Configuring UPnP™ Settings Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among networking equipment, software and other hardware devices. The UPnP protocol allows devices to connect seamlessly and to simplify the implementation of networks in the home and corporate environments. With the function enabled, you don‟t need to configure the port mapping for each port, and the camera is connected to the Wide Area Network via the router. Steps: 1. Enter the UPnP™ settings interface. Configuration >Advanced Configuration > Network > UPnP 2. Check the checkbox to enable the UPnP™ function. The name of the device when detected online can be edited. Figure 6-15 UPnP Settings 6.3.9 Configuring Wireless Dial Settings Purpose: Data stream of audio, video and image can be transferred via 3G / 4G wireless network. Note: The wireless dial function requires the support of the camera. 51
![](/manual_guide/products/levelone-fcs5058-user-manual-fe2331c/51.png)