Lenovo Z50-70 Laptop Hardware Maintenance Manual - Lenovo G50-30, G50-45, G50- - Page 46
Fan assembly
View all Lenovo Z50-70 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75 Hardware Maintenance Manual 1070 Fan assembly Attention: For the Lenovo G50-30, select models (computers with UMA architecture) do not have a thermal fan. For access, remove these FRUs in order: • "1010 Battery pack" on page 33 • "1020 Base cover" on page 34 Figure 7. Removal steps of fan assembly Unplug the fan connector in the direction shown by arrow 1. Then remove the screws 2. Note: Be careful not to damage the connector. Step Screw (quantity) 2 M2 × 3.5 mm, flat-head, nylok-coated (3) Fan + MB Color Torque Black 1.5 ~ 2.0 kgf*cm When installing: Make sure that the connector is attached firmly. 42
42
G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75 Hardware Maintenance Manual
1070 Fan assembly
Attention:
For the Lenovo G50-30, select models (computers with UMA architecture)
do not have a thermal fan.
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 33
•
“1020 Base cover” on page 34
Figure 7. Removal steps of fan assembly
Unplug the fan connector in the direction shown by arrow
1
. Then remove the
screws
2
.
±
²
²
²
Note:
Be careful not to damage the connector.
Step
Screw (quantity)
Color
Torque
2
M2 × 3.5 mm, flat-head, nylok-coated (3)
Fan + MB
Black
1.5 ~ 2.0 kgf*cm
When installing:
Make sure that the connector is attached firmly.