Lenovo ThinkServer RD340 (English) User Guide - Page 50
System board components, totheport1onthe
![]() |
View all Lenovo ThinkServer RD340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
• If you are using a ThinkServer RAID 700 Adapter, do the following: 1. Use one mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector 3 on one end of the cable to the ports 3-0 on the RAID card. Then, connect the mini-SAS connector 4 on the other end of the cable to the mini-SAS ports 0-3 on the backplane. 2. If your server has more than four hard disk drives installed, use the other mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector 1 on one end of the cable to the ports 7-4 on the RAID card. Then, connect the mini-SAS connector 2 on the other end of the cable to the mini-SAS ports 4-5 or mini-SAS prots 4-7 on the backplane. • If you are using a ThinkServer RAID 710 Adapter, do the following: 1. Use the mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector 1 to the port 1 on the RAID card. Then, connect the mini-SAS connector 2 to the mini-SAS ports 0-3 on the backplane. 2. If your server has more than four hard disk drives installed, use the other mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector 3 to the port 2 on the RAID card. Then, connect the mini-SAS connector 4 to the mini-SAS ports 4-5 or mini-SAS ports 4-7 on the backplane. Refer to the following topics for information about the connector locations: • "Hot-swap hard-disk-drive backplane" on page 33 • "RAID card" on page 30 • "System board components" on page 38 System board components The following illustration shows the component locations on the system board. 38 ThinkServer RD340 User Guide and Hardware Maintenance Manual
![](/manual_guide/products/lenovo-thinkserver-rd340-english-user-guide-8d7f842/50.png)