Lenovo 53581FU Hardware Maintenance Manual for K220 - Page 28
Using Device
UPC - 884343670638
View all Lenovo 53581FU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 5. Using the Setup Utility 3. The password dialog box will be displayed. Type the new password, and press Enter. 4. when prompted to confirm the password, type the password again. If you type the password correctly, the password will be installed. To delete a previously set user password, do the following : Note: When prompted for a password, you must type your administrator password. 1. From the Setup Utility program menu, select Set Power-On Password and press Enter. 2. when you type the user password. a message will display that Enter New Password. Press Enter and a Setup Notice will display that indicates Password Uninstalled. 3. Press any key to contine. Using Device Device is used to enable or disable user access to the following device: Floppy Drive Setup When this feature is set to Disable, the device of Floppy Drive Setup is disabled and will not be displayed in the system configuration. To set Device, do the following: 1. Start the Setup Utility program (see "Starting the Setup Utility program" on page 16). 2. From the Setup Utility program menu, select Device. 3. Select Floppy Drives Setup and press Enter. . 4. Select Disable or other related items and press Enter. 5. Return to the Setup Utility program menu and press F10 to save changes and exit setup.. Note: If you do not want to save the settings, select Serial Port Setup, Parallel Port Setup, USB Setup, ATA Drives Setup, Video Setup, Audio Setup, Network Setup. and so on. See the information displayed on the right side of the screen. 25