Lantronix SLC 8000 Quick Start Guide - Page 2
Logging In To The Web Configuring Network Ip Settings, Logging In To The Command Interface, Ip - user guide
View all Lantronix SLC 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4. IP ADDRESSING Both of the SLC 8000 network ports (Ethernet 1 and Ethernet 2) default to DHCP- assigned IP addresses. If you want to assign a different IP address, it must be within a valid range, unique to your network, and with the same subnet mask as your workstation. To configure the SLC 8000, you need the following information: IP address (if not already assigned Subnet mask (if not already assigned Gateway DNS 5. CONFIGURING NETWORK (IP) SETTINGS The fastest way to set basic network parameters is by using the front panel keypad and display. Note: If you prefer, you can get started by following a Quick Setup script on the command line interface using Telnet or SSH, or by connecting a terminal directly to the console (RS-232) port. The web page interface also provides a Quick Setup page. See Quick Setup in the User Guide. Use the right and left arrow buttons to navigate from one option to another. Use the up and down arrow buttons to navigate between parameters within an option or to increase or decrease a numerical value. Note: If no buttons are pressed for 30 seconds, the front panel display times out without accepting unsaved changes and returns to displaying the hostname and clock. For example, to change the IP settings: 1. Press the right arrow button to display the Network Settings option and the current IP address. 2. Press the Enter button to go into editing mode. 3. Use the up and down arrow buttons to increment or decrement the IP address indicated by the cursor. 4. Use the right an left arrow buttons to move to and change the remaining digits of the IP address. Press the Enter button to exit editing mode when finished. 5. Press the down arrow button to display the Subnet Mask setting. 6. Edit the Subnet Mask in the same fashion as the IP address and press the down arrow. 7. Edit the Gateway and DNS settings. 8. Press the down arrow after the DNS3 setting to go to the Save settings? Yes/No prompt. 9. Select Yes at the prompt and press Enter to save changes. Repeat steps 1-8 for the other options (console port and date/time). Note: Another option, release, is for restoring factory defaults. The default password for this action is 999999. After you save the values for your console manager, changes take effect immediately. 6. LOGGING IN TO THE WEB PAGE This section includes instructions for accessing both the web page and the command line interfaces. You can use either method to configure all parameters. To log in to the SLC 8000 web page: 1. Open a web browser (Internet Explorer 8.0 and later). 2. In the URL field, type https:// followed by the IP address of your SLC. 3. At the first login, enter sysadmin (all lower case) as the user and PASS (all upper case), the factory default password. The first time you log in, the SLC 8000 Quick Setup page is displayed, subsequent logins will display the SLC 8000 Home Page. (To display Quick Setup again, click the Quick Setup tab). 4. Do one of the following: To bypass the Quick Setup page and go directly to configuring the SLC, click the Accept default Quick Setup settings checkbox and click Apply. Update basic network parameters, if desired, and click Apply. 7. LOGGING IN TO THE COMMAND INTERFACE To access the command line interface: 1. Do one of the following: With a network connection, use a Telnet or SSH program to Telnet or SSH to xx.xx.xx.xx (the IP address in dot quad notation), and press Enter. You should be at the login prompt. Note: By default, Telnet is disabled. To enable it, use the Services web page, a serial terminal connection, or an SSH connection with a serial terminal connection, when the command line displays, press Enter. 2. Enter sysadmin as the user name and press Enter. 3. Enter PASS as the password and press Enter. The first time you log in, the Quick Setup script opens automatically. Subsequent logins display the command prompt only. (To obtain the Quick Setup script again, use the admin quicksetup command.) Note: Change the default password as soon as possible to prevent access by unauthorized personnel. Subsequent logins require the username sysadmin and the appropriate password to log in as system administrator. 4. If the Quick Setup script displays, update basic network parameters, as desired. Otherwise, just press Enter until the command prompt displays. By pressing Enter, you are accepting the current settings. Notes: For general command line interface help, type "help command line". For help with a specific command, type "help" followed by the command; for example, "help set network" or "help admin firmware". Contact Technical Support For technical support queries, visit http://www.lantronix.com/support or call (800) 422-7044 Monday - Friday from 6:00 a.m. - 5:00 p.m., Pacific Time, excluding holidays. Latest Firmware For the latest firmware downloads, visit http://www.lantronix.com/support/downloads IP Address Assignment Tutorial To view a tutorial on how to assign an IP address, visit http://www.lantronix.com/support/tutorials © 2015 Lantronix, Inc. Lantronix is a registered trademark, and SLC is a trademark of Lantronix, Inc. All other trademarks are the property of respective owners. Specifications subject to change without notice. 900-749-R Rev A 2