LG SH5B User Guide - Page 3

Front Panel, Rear Panel, Subwoofer Connection - sound bar

Page 3 highlights

Front Panel The buttons are located on the rear panel Standby / On Selects Function Adjusts Volume Rear Panel OPTICAL IN Connect to an Optical device PORTABLE IN Connect to a Portable device USB port Connect to a USB device HDMI IN Connect to HDMI out on a device HDMI OUT (TV ARC Connect to a TV 1 Subwoofer Connection Place the wireless subwoofer near the speaker and follow steps below. a Connect the power cord of wireless subwoofer to the outlet. b Turn on the main unit. : The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on. Subwoofer Connection Manually a Reset the Subwoofer If the green LED on the subwoofer blinks rapidly, skip this step and go to b • Press and hold Pairing button for 5 seconds. • The LED lights up alternately in red and green. • Unplug the power cord. After the LED turns off completely, plug in the power cord again. When the reset is completed, the subwoofer's green LED blinks rapidly. b Reset the sound bar • Adjust volume to minimum. "MIN" appears on display window. • Press and hold (Mute) button on the remote control for 3 seconds. "SUB - WF RESET" appears on display window. • Turn the sound bar's power off and on while the subwoofer's green LED blinks. When the connection is completed, you can see the green LED on the subwoofer. Keep the sound bar and the subwoofer away from the following (ex. wireless router, microwave oven, etc.) over 1m (3.3 ft) to prevent wireless interference. >1m

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Front Panel
Rear Panel
Subwoofer Connection
1
Place the wireless subwoofer near the speaker and
follow steps below.
a
Connect the power cord of wireless subwoofer
to the outlet.
b
Turn on the main unit. :
The sound bar and wireless subwoofer will be
automatically
connected. The subwoofer's
green LED turns on.
Subwoofer Connection Manually
a
Reset the Subwoofer
If the green LED on the subwoofer blinks rapidly,
skip this step and go to
b
Press and hold
Pairing
button for 5 seconds.
The LED lights up alternately in red and green.
Unplug the power cord. After the LED turns
off completely, plug in the power cord again.
When the reset is completed, the subwoofer's green
LED blinks rapidly.
b
Reset the sound bar
Adjust volume to minimum. "MIN" appears on
display window.
Press and hold
(Mute) button on the
remote control for 3 seconds.
"SUB - WF RESET" appears on display
window.
Turn the sound bar’s power off and on while
the subwoofer’s green LED blinks.
When the connection is completed, you can see the
green LED on the subwoofer.
Keep the sound bar and the subwoofer
away from the following (ex. wireless router,
microwave oven, etc.) over 1m (3.3 ft) to
prevent wireless interference.
>1m
OPTICAL IN
· · · · · · · · · · ·
Connect to an Optical device
PORTABLE IN
········
Connect to a Portable device
USB port
·················
Connect to a USB device
HDMI IN
·········
Connect to HDMI out on a device
HDMI OUT (TV ARC)
··············
Connect to a TV
··································
Standby / On
·······························
Selects Function
·························
Adjusts Volume
The buttons are located on the rear panel.