LG LSC27926ST Owner's Manual - Page 12
Height adjustment
View all LG LSC27926ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation If the freezer compartment door is lower tha n the refrigerator compartment door Height adjustment (First identify your adjusting screw type, it could vary) Make them level by inserting flat (- type) driver into the groove of the left height adjusting screw and rotating it clockwise ( ). If the freezer compartment door is higher than the refrigerator compartment door - Type 1 Make them level by inserting flat (- type) driver into the groove of the right height adjusting screw and rotating it clockwise ( ). If the freezer compartment door is higher tha n the refrigerator compartment door -Type 2 Adjust the level when the refrigerator door is lower than the freezer door during the use of the refrigerator. Keeper nut Tool for adjustment Adjustment Up hinge pin Down CAUTION 1. Using the wide side of the tool for adjustment , turn the keeper nut ( ) clockwise to loosen the keeper nut. 2. Using the narrow side of the tool for adjustment, turn the adjustment hinge pin ( ) clockwise or ( ) counterclockwise to level the refrigerator and freezer door. 3. After setting the level of the door, turn the keeper nut( ) counterclockwise to tighten. Do not force too hard to level the height. The hinge pin can be pulled out. (Adjustable range of height is a maximum of 1/2" (1,27 cm ). After leveling the door height The refrigerator door will close smoothly by raising the front side by adjusting the height adjusting screw. If the door does not close properly because it is improperly adjusted, the performance of the refrigerator will be affected. 12